400w CMY LED Moving Head Beam Spot Wash 3in1

Input voltage: AC110V-240V/50-60HZ
Power consumption: 430W
Light source life: 50000 hours
Light source specification: Imported new LED Module engine 400W
Color temperature: 8000K CRI>95
Dimming system: 0-100% linear adjustment
Focusing system: linear adjustment from 4 meters to 50 meters
Frost: 1 independent frost filter, soft and natural light spot
Spot zoom angle: 4-35 degrees
Wash angle:10-50 degrees
High-speed strobe: 0-30 times/sec.
Adjustable speed strobe effect. Strobe macro function.
CONTROL AND PROGRAMMING
Channel mode: 23 /21 channels
Display mode: LCD display, key + touch dual operation mode
Control signal: International standard DMX512.
With RDM function, online software upgrade is available, dial address code
Color: 8 colors + open.
Color half-color function
Color mixing system: linear CMY+CTO color mixing system
Fixed gobos: 12 fixed patterns + open
Rotating gobos: 7 glass patterns, each glass pattern can be independently forward and reverse
Prism system: standard single 6-facet prism and 8 prism, each prism can be independently forward and reverse
Macro function: console reset function, self-propelled mode, master-slave mode
Horizontal scan: 540 degrees (16bit precision scan) electronic error correction
Vertical scanning: 270 degrees (16bit precision scanning) electronic error correction
Cooling method: Adopt axial fan to enhance cooling
Safety device: with electronic temperature control overheating protection,
electronic temperature control automatic power-off protection when the overheating system fails
Appearance material: high temperature resistant plastic
Working environment: -20 degrees - 40 degrees